- A commercial washing machine is sized by the dry weight of laundry it takes per load, in kg. Size from your kilos a day, hours and cycle times, not from the room.
- Washer-extractors come in two main mounting types: suspended ('soft-mount') machines that can usually stand on a normal floor, and rigid ('hard-mount') machines that are bolted to a suitable floor. Your supplier will say which suits your floor.
- Faster, harder spinning leaves less water in the laundry, which shortens drying. Ask suppliers to compare spin performance, not just drum size.
- Programmable controls let you set temperatures, times and chemical dosing. For care homes at best-practice level, HTM 01-04 calls for a machine capable of meeting its disinfection requirements, with the disinfection stage validated at least annually.
- Installation needs the right backflow protection on the water supply (Water Fittings Regulations), drainage that copes with fast discharge, and the right electrical supply.
- Prices depend on size, specification, installation and how you pay. We don't publish them: compare written quotes on the same spec.
What is a commercial washing machine?
A heavy-duty washing machine built for business use: a larger drum, a stronger build for many cycles a day, controlled temperatures and programmes, and a fast spin (the 'extract') that takes out much of the water before drying. Most commercial machines in UK businesses are front-loading washer-extractors.
Suspended washer-extractor
The drum sits on springs and dampers that absorb spin vibration, so the machine can usually stand on an ordinary solid floor without bolting down.
Rigid washer-extractor
Bolted to a suitable floor or plinth, which takes the spin forces. Often lower-cost to buy, but the floor has to be right.
Barrier washer
Loaded on a 'dirty' side and unloaded on a 'clean' side through a wall, used where dirty and clean laundry must be kept fully apart.
Customer-operated machines
Built for launderettes and shared laundry rooms, with payment systems and simple customer controls.
What size commercial washing machine do you need?
Work out the kilos of dirty laundry you produce a day, then divide by the cycles a machine can run in your laundry hours and how full you'll load it. That gives the total capacity you need, which you can split across one large machine or several smaller ones.
- Capacity is dry weightA machine's size in kg is the maximum load of dry laundry per cycle. Weigh dirty laundry before it goes in.
- Don't run at the limitBulky items (duvets, horse rugs, towels) fill the drum before they reach the weight. Many people load below the rated figure.
- Several machines or one big oneTwo machines keep you washing if one breaks down and let you wash different things at once; one bigger machine can be more efficient on big uniform loads.
- Match the dryersThere's no point washing faster than you can dry. Size dryers on their own cycle time.
- Plan for peaksChangeover days, outbreaks, match days or a full house all push the daily load up. Add headroom.
- Count the hoursA machine that runs 12 hours a day does half as much again as one that runs 8.
Our laundry capacity calculator does these sums from your beds, rooms or covers, or from your kilos a week, and shows the washers and dryers needed at any machine size.
Why does spin speed matter on a commercial washer?
The harder a machine spins at the end of the wash, the more water it removes. Less water left in the laundry means shorter drying times and lower drying energy, which often matters more to your running costs than the wash itself.
Suppliers describe spin in revolutions per minute or as a 'G-factor' (the force on the laundry relative to gravity). A higher figure generally means drier laundry out of the washer. Suspended machines are usually able to spin harder than rigid ones of the same size, because their suspension absorbs the forces. Ask suppliers to compare the residual moisture you can expect for your typical load, and how that changes your dryer cycle time.
Ask about
- Maximum spin and G-factor for the size you're considering
- Residual moisture for your typical items
- Whether spin can be reduced for delicate items
- Out-of-balance protection
Watch out for
- Comparing drum size without spin
- Rigid machines on a floor that can't take the forces
- Assuming drying time stays the same if you change washers
Which programmes and controls do you need?
At least programmes you can set for temperature and time, so the right items get the right wash every time. Add automatic chemical dosing for consistency, and disinfection and pre-wash (sluice) programmes if you wash soiled linen, as care homes do.
What does installing a commercial washing machine involve?
A suitable floor and access route, a water supply with the right backflow protection, drainage that can take a fast, hot discharge, and the right electrical supply. Ask for a site survey before you order, so the quote includes the work needed.
- Floor and accessMeasure every door and corridor on the way in. Rigid machines need a floor or plinth able to take the spin forces.
- Water supplyMost machines take cold and sometimes hot water. Check the pressure and pipe sizes the machine needs.
- Backflow protectionThe Water Supply (Water Fittings) Regulations 1999 sort fluids into five categories by risk; category 5 is "a serious health hazard", including fluid containing faecal material or other human waste (Schedule 1), and every water system "shall contain an adequate device or devices for preventing backflow" (Schedule 2, paragraph 15). The installer should fit protection to suit what you wash.
- DrainageCommercial machines often empty through a drain valve by gravity, quickly. The drain, trough or gully must be big enough.
- Trade effluentDischarging trade effluent from trade premises into a public sewer needs the sewerage undertaker's consent (Water Industry Act 1991, section 118). Ask your water company whether your laundry discharge counts.
- Electrical supplyLarger machines may need a three-phase supply or a dedicated circuit. Tell suppliers what you have.
Should you buy a new, refurbished or leased commercial washing machine?
New machines come with a full warranty and the latest controls; refurbished machines cost less up front but check the warranty, the parts and who services them; leasing or an all-in monthly plan spreads the cost and can include servicing.
| Option | Good for | Check |
|---|---|---|
| New, bought outright | Long-term use, full warranty, latest programmes | Warranty length and what it covers; servicing after the warranty |
| Refurbished or reconditioned | Lower budgets, short-term needs | What was replaced, warranty, parts availability for that model, who services it |
| Leased or rented | Spreading cost, upgrading at the end of the term | Total over the term, end-of-term options, who maintains it |
| All-in monthly plan | One fixed payment including servicing | What's included and excluded, response times, minimum term |
See our laundry equipment leasing guide for the questions to ask.
What affects the price of a commercial washing machine?
Capacity, mounting type, spin, the controls and programmes, dosing, heating type, installation work and how you pay. We don't publish prices because the same size of machine can be specified very differently.
- CapacityBigger drums cost more, but one bigger machine can cost less than two smaller ones.
- Build and mountingSuspended machines often cost more than rigid ones, but may avoid floor works.
- ControlsProgrammable and disinfection-capable controls, logging and payment systems add to the price.
- InstallationPlumbing, drainage, electrics, removal of old machines and any floor work.
- Service coverWarranty, servicing and response times after installation.
- Running costsWater, energy and chemicals per load, and the drying time your spin leaves you with.
How do you keep a commercial washing machine running?
Train staff to load and dose correctly, follow the manufacturer's cleaning routine, and have it serviced at the recommended intervals. Employers must keep work equipment maintained and keep any maintenance log up to date.
Under the Provision and Use of Work Equipment Regulations 1998, "every employer shall ensure that work equipment is maintained in an efficient state, in efficient working order and in good repair," and where machinery has a maintenance log, it must be kept up to date (regulation 5). Care homes should also keep a logbook of service and repair visits, according to HTM 01-04 (Social care volume, 3.2). More in our repair and servicing guide.
Get quotes for commercial laundry equipment
Tell us about your laundry once. We pass it to a specialist UK commercial laundry equipment supplier, who will:
- Talk through your laundry: what you wash, how much, the space you have, and your water, drainage, power and any gas.
- Quote in writing to buy, lease or on a monthly plan, with delivery, installation and servicing shown.
- Explain the service cover: response times, what's included, and who to call when a machine stops.
For businesses and organisations. Prefer email? Write to [email protected] with your business type, size and the machines you need.
Related guides
Commercial washing machines: frequently asked questions
What is a washer-extractor?
The usual name for a commercial washing machine: it washes the load and then extracts water with a fast spin before you dry it. Most front-loading commercial machines are washer-extractors.
What's the difference between a commercial and an industrial washing machine?
There's no fixed definition. Suppliers often say 'industrial' for the largest machines and 'commercial' for the rest. Compare capacity, build, spin and programmes rather than the label.
What size commercial washing machine do I need?
Divide your kilos of laundry a day by the number of cycles you can run in your laundry hours and by how full you'll load the drum. Our laundry capacity calculator does this for any machine size.
Can a commercial washing machine go on any floor?
Suspended (soft-mount) machines can usually stand on an ordinary solid floor because their suspension absorbs the spin. Rigid (hard-mount) machines must be bolted to a floor or plinth able to take the forces. Ask the supplier to check.
Do commercial washing machines need three-phase power?
Some larger machines do and others run on single phase. Tell suppliers what supply you have before they recommend a machine.
Can I use a commercial washing machine at home?
It's possible, but commercial machines are built and priced for business use and may need plumbing, drainage and power a home doesn't have. This site is for business buyers.
How long does a commercial washing machine cycle take?
It depends on the programme, the temperature, how long it's held and the spin. Use the times for the programmes you'll actually run when sizing; suppliers can give them for their machines.
What affects the price of a commercial washing machine?
Capacity, mounting, spin, controls and programmes, dosing, installation and how you pay. We don't publish prices; compare written quotes for the same specification.
Sources
We checked the facts on this page against these sources on 18 November 2026. Guidance changes: check the current version before you rely on it.
- HTM 01-04: Social care volume (NHS England, PDF)
- Water Supply (Water Fittings) Regulations 1999, Schedule 1: fluid categories (legislation.gov.uk)
- Water Supply (Water Fittings) Regulations 1999, Schedule 2, paragraph 15: backflow prevention (legislation.gov.uk)
- Water Industry Act 1991, section 118: consent for discharge of trade effluent into a public sewer (legislation.gov.uk)
- Provision and Use of Work Equipment Regulations 1998, regulation 5: maintenance (legislation.gov.uk)